Introduction:In this era of digital streaming, 4K Ultra HD TVs are all the rage. If you’re in the market for a new television, or are considering upgrading to a 4K model, read on. We’ll show you how to get a stunning viewing experience on your TV. Basic Fine-Tuning for Good Viewing Experience Do you ever feel like you spend hours just to get the perfect TV viewing experience? You're not alone. Fortunately, there are some basic fine-tuning steps you can take to dramatically improve the picture quality of your television. This won't take more than 10 minutes of your time, but it will significantly improve the picture quality of your television. Adjust brightness, contrast, color, sharpness, backlight level, image size, and a few other settings and you're good to go. Let's get familiar with the common settings which will improve the picture quality. Brightness Have you ever wondered why the brightness level of your TV is different than the one you have in your home? This is because the brightness level on a TV should be controlled by the TV itself and not by some external source. The brightness feature on a TV controls the black level (absolute black level) of the image. As you will increase the value of brightness, the black level will be decreased. In simple words, when you will increase brightness, the black objects in the image won’t look as black as it was earlier. This will ultimately cause a degradation in the viewing experience. Contrast Contrast is an important aspect of picture quality, and it's something that you should adjust accordingly. On contrary to brightness, the contrast is a difference between the dark areas and its neighboring light. The contrast level is considered as white level. So, once you adjust the brightness level, adjust the contrast level. After this, revisit the brightness settings for best results. You may have to play around with these settings to get them just right for your taste and viewing environment. Backlight One of the settings you'll want to adjust is the backlight. This option is valid only with the LCD TVs. Even if you have an LED Backlit TV, you will get this option. So what's the difference? LED backlighting is more local, while LCD backlighting needs a light bar that runs across the entire screen. With LCDs, you can see a halo effect around bright objects when you have the backlight turned up too high. Try to keep it as low as possible to experience ambient light conditions, and increase it only when necessary. Colour Do you ever feel like your TV just can't quite do colors justice? That's because it probably needs a little adjusting. Color is an important part of any image, and it should be adjusted to fit your taste. This setting adjusts the intensity of color in the image quality. Color may term as saturation in your TV. However, don’t get confuse this with hue or the RGB makeup. Hue is another setting that deals with the colors in an image, while RGB makeup determines how much red, green, and blue is used to create an image on your screen. If you pull down the color setting to zero, you will get the old-school black-and-white images. Adjust this setting only up to the level which is pleasing to your eyes—you don't want everything looking too washed out or too colorful. With a little tweaking, you can make your TV look amazing! Hue or Tint Hue or tint is a method used to correct the phase errors which occurs due to the miscommunications between broadcasts and TV tuners. By adjusting the hue, you are able to "move" the broadcast signal back into sync with your TV. What this means is that you will see a much more vivid and accurate picture on your screen. To adjust the hue on your TV, consult your TV's manual or search online for instructions. Sharpness The sharpness setting on your TV can be a little confusing. It's not really about how sharp the image is, but rather how much detail the image projects. Think of it this way: you can have a very sharp knife, but if you cut something with a dull edge, the knife won't do much damage. You'll get a better result by cutting with a sharp knife than you will with a dull one. The same is true for your TV. If you have the sharpness setting turned up too high, you'll see the pixelated edges of the image. However, if you turn it down too low, you'll lose all of the details and the image will be muddy. Find the right balance to get the best viewing experience for you and your family. Refresh rate or motion Refresh rate is the number of times per second that the image on the screen is updated. The motion of the instances in the video is controlled by these refresh rate samples. It’s like adjusting the shutter speed on a camera. The refresh rate is not that important in regular video content. You might not even be able to see a difference. However, if you are watching action movies or sports, you will notice shaky and blurry images. Higher refresh rates ensure smooth video playback. Most of the TV sets support 60Hz refresh rates, whereas some TV sets come with 120Hz refresh rates. If this is an issue for you, adjust the refresh rates to the highest number available on your TV. Aspect ratio and Image size If you're looking to buy a television, you'll need to consider two main things: the aspect ratio and the image size. Gone are the days when we used to watch everything in 4:3 aspect ratio. Although it is still highly accepted, no one is actually buying a TV with 4:3 aspect ratio. The most common ratio you will get on a standard television is 16:9. However, there are a few high-end TV sets who offers a True 4K resolution with 17:1:9 aspect ratio. Then, there is image size. You can get HD 720p, Full HD 1080p, or Ultra HD 2160p resolution on TV models. It really depends on your needs and what you're looking for in a television. Do you want the best possible viewing experience? If so, we recommend going for an Ultra HD 2160p resolution with a 17:1:9 aspect ratio. Actual Calibration for Super Impressive Viewing Experience When it comes to getting the most out of your TV viewing experience, calibration is key. This is the process of adjusting the image settings on your TV so that you get the best possible picture. Once you've tweaked these settings to your liking, you'll be able to enjoy your shows and movies in stunning detail. However, before you begin calibrating, just remember to take note of the original settings. This is so you can always roll back if anything goes wrong. If you're not sure how to calibrate your TV, don't worry—we've got you covered! Temperature Temperature is one of the settings that you can calibrate on your TV. This setting calibrates the intensity of the color across the spectrum. This is shown in curves. You may notice settings like ‘Cool’, ‘Warm’ and ‘Normal’ in the color temperature. The cool temperature accentuates the blue color while the warm tone accentuates the red color in the image. Experiment with these different temperatures to see which one gives you the best viewing experience. White Balance Have you ever adjusted the Color Temperature on your TV? No? You should. This setting adjusts the red, green and blue colors in the image simultaneously so that you get a perfect blend to form pure white. In case you don’t know this, if the red, green and blue colors are mixed together, you will get the white color. So, adjusting these settings till you get a pleasing viewing experience is important. Sometimes, people find that they have to adjust these settings when they watch sport or play games, as the colors can look a bit off. RGB gain and offset If you're struggling to get a perfect picture on your television, don't worry—you're not alone. Luckily, there are a few things you can do to adjust your picture and get the stunning viewing experience you deserve. One of the most important is adjusting the RGB gain and offset levels. This simply means adjusting the levels of red, green and blue so that they are in equal balance. If one color is appearing more dominant than the rest, you can adjust it using these controls. It's best to use a white image as your benchmark, adjusting the levels until you get as close to perfect as possible. With a bit of tweaking, you can have the perfect picture on your screen in no time! Gamma Gamma is often misunderstood, but it's an incredibly important picture setting. Gamma affects the brightness and darkness in the mid-tones of an image, and it's one of the settings that you'll want to play around with to get the best possible picture quality for your TV. You'll usually want to set gamma to your environment, so if you have a lot of bright light in your room, you'll want to increase the gamma. If you have a darker room, you'll want to decrease it. This setting can be very important, as it helps you see all the details in both dark and light areas of an image. HDR HDR is short for high dynamic range, and it's one of the most important elements of a great viewing experience. When it's done well, HDR can make pictures look incredibly realistic by providing a wider range of colors and luminance levels. This ensures that everything from the brightest highlights to the deepest shadows looks just as it should. Because of this, it's important to calibrate your HDR settings to get the best possible picture quality. Luckily, most modern HDR TVs are capable to automatically adjust the HDR settings, so you might not face any issue related to it. However, if you want to make sure that everything is just right, you can always adjust them manually. Conclusion:After reading this post, you should be able to get a stunning viewing experience on your TV. Make sure to always do some basic fine-tuning and adjust the settings to fit your specific needs and environment. Doing so will provide you with hours of enjoyable viewing.
0 Comments
Leave a Reply. |
AuthorDon’t buy anything until you’ve read a review. Our expert reviews are the best way to know without a doubt that you are getting the right product for your needs. We only review products we think are worth. Archives
May 2022
Categories
All
|
Recommendations are independently chosen by Gadgets & Gifts editors. Purchases you make through our links may earn us a commission.