Introduction:A surround sound system can make watching television a much more immersive experience by giving you surround sound effects from all angles. If you have a surround sound system and a television, but don’t know how to connect them, don’t worry – we’ll show you how. While the process may vary depending on the make and model of your equipment, the basics are always the same. Follow these simple steps, and you’ll be enjoying cinematic sound in no time. KEY TAKEAWAYS There are a few key things you need to do before connecting your surround sound system to your TV. First, make sure you have the right input cable. Different audio devices use different cables, so it's important to check your device before you start unpacking your speakers. The next step is to adjust the positioning of your speakers. If they're not in the right spot, you'll end up with poor sound quality. Make sure you test out each speaker before you move on to the next one. And finally, don't forget to set up your surround speakers! They'll provide an immersive audio experience that will make you feel like you're right in the middle of the action. How to Connect a TV to Surround Sound If you're lucky enough to have a surround sound system, and you're also lucky enough to have a TV, then you're in for a real treat. But before you can start enjoying that sweet, sweet surround sound, you need to make sure the two are properly connected. Not all surround sound systems are made the same, so make sure to consult your specific systems user manual. That said, below are the general steps to set up an external speaker system. STEP 1 Plan the Speaker Layout and Setup First, think about how you want to set up your speakers around your viewing area. Not all surround sound AV receivers connect to TVs the same way. Some receivers have different colored ports for each input (red, white, and yellow), while others have a single HDMI port that you’ll need to connect the TV to. Get all the necessary wires together. You’ll need a speaker wire to connect the speakers to the receiver and an HDMI, RCA cable, or optical cable to connect the receiver to the TV. Arrange your speakers around the room how you see fit. Sometimes the surround sound system will label which speakers should go to the left or right of the TV. STEP 2 Connect Speakers and Run Wire Now it's time to connect your speakers. If you bought a complete system, all of the wires you need will be included, but if you bought your system in separate pieces, you'll need to purchase speaker wire. Make sure that the wire gage is appropriate for the distance between your receiver and each speaker. Once you have the wire, it's time to run it to the receiver. Many people choose to hide the wires by running them under the carpet, but you can also purchase wire floor covering and run it along the room’s edges. Connect each speaker’s wires as stated in your manual, then plug in your subwoofer directly to your receiver. STEP 3 Connect AV Receiver and Test Sound Now it's time to test your surround sound! Turn on your TV and receiver, and hit the surround sound button on your receiver. If everything is hooked up correctly, you should now be able to hear surround sound from your TV. Congratulations—you did it! Conclusion:Follow these simple steps to connect surround sound to your TV and be watching your favorite shows and movies in high-quality audio in no time. While the task of connecting surround sound may seem daunting, it's actually a lot easier than you might think - and our guide makes it even simpler. So, what are you waiting for? Get started today!
0 Comments
Leave a Reply. |
AuthorDon’t buy anything until you’ve read a review. Our expert reviews are the best way to know without a doubt that you are getting the right product for your needs. We only review products we think are worth. Archives
May 2022
Categories
All
|
Recommendations are independently chosen by Gadgets & Gifts editors. Purchases you make through our links may earn us a commission.